How do you self-tape an audition?

Follow the casting brief first. Frame yourself from the chest up at eye level, light your face from the front and record clean sound in a quiet room. In a scene, look at your reader just beside the lens, not into it; look into the lens for the slate, or when the brief asks you to speak to camera.

Checked on against the casting guidance listed below. We make EyePrompt, so weigh what follows with that in mind.

Where to look: your reader, not the lens

In a scene, casting wants to watch you talk to someone. Put your reader just beside the camera, close to the lens and at your eye level, and play the scene to them. Spotlight's guide asks for an eyeline close to the camera because casting wants to see both sides of your face, and the Casting Directors' Guild's advice puts the reader next to the camera and says not to read directly to camera.

Looking straight into the lens during a scene reads as talking to the audience, which most scenes are not. Look into the lens when the brief asks for it: the slate, a direct-to-camera piece such as a presenter read or a commercial, or a monologue the brief says to deliver to camera.

Keep your reader on one side for the whole scene. If you talk to two characters, place them on either side of the lens, both close to it.

The slate

The slate is the short introduction at the start. The Casting Directors' Guild's advice is that a slate, if one is asked for, goes straight into the camera. Say only what the brief asks for, often your name and the role, in a friendly, normal voice, and keep it to a few seconds.

Framing, light and sound

How long should a self-tape be?

As long as the scenes you were sent, plus a short slate. Do not add extra material unless the brief asks for it. Casting teams watch many tapes, so start promptly and trim any dead air before and after each take.

Send it the way the brief asks: file names, file type, one file or several, and the deadline. When the brief says nothing about names, Spotlight suggests your name first, then the project title and the scene.

Where a teleprompter helps, and where it does not

Part of the tapeWhere you lookTeleprompter?
SlateInto the lensRarely needed: it is a few words
Scene with a readerYour reader, just beside the lensNo: learn the lines; text on a screen pulls your eyes away from your reader
MonologueUsually just off the lens, unless the brief says to cameraOnly to learn the lines, or when it is delivered to camera
Presenter read, commercial or a piece to cameraInto the lensYes: the text sits right under the lens
Learning linesAnywhereYes: run the text at your pace until you no longer need it

Casting expects you to know the scene well. A teleprompter is for words you deliver to the lens, and for learning.

Using EyePrompt for the parts said to camera

On iPhone and iPad, EyePrompt keeps the text in a narrow band right under the front camera while it records, and Smart Follow moves it at the pace you speak. Turn the iPhone sideways for a landscape self-tape: Horizontal recording moves the text into a short column beside the camera, and the take saves as 16:9. That suits a presenter read, an introduction or a piece to camera. Rehearse runs the text with the camera on and no recording, which is a way to learn lines. For a scene with a reader, put the script away. EyePrompt on the App Store.

Sources: Spotlight, How to self-tape; The Casting Directors' Guild, Advice for self-taping (PDF).

Download on the App Store

Questions people ask

Should you look into the camera in a self-tape?

Not in a scene. Look at your reader, just beside the lens, so casting sees you talking to someone. Look into the lens for the slate, and for pieces the brief asks you to deliver to camera.

Where should my reader stand for a self-tape?

Just beside the camera, close to the lens and at your eye level, and a little further from the microphone than you, so their voice is quieter than yours.

How long should a self-tape be?

As long as the scenes you were sent, plus a short slate. Follow the brief, add nothing it did not ask for, and trim dead air before and after each take.

Can I use a teleprompter for a self-tape?

For the parts you say to camera, such as a presenter read or an introduction, yes. For a scene with a reader, no: casting expects you to know the lines, and reading from a screen pulls your eyes away from your reader.

What do you say in a slate?

What the brief asks for, usually your name and the role, sometimes your height, location or agent. Say it into the lens, in a few seconds, in your normal voice.

Should a self-tape be landscape or portrait?

Landscape, unless the brief asks for portrait.

Related guides

All guides

Google lets you pick the sources you want to see more of. You can add EyePrompt as a preferred source on Google.